A broken lock, a lost key, a missing locking pin, blades that rattle when the shutter is open, or debris jamming the track: these are accordion shutter problems you can fix with a part, not a new shutter. We sell replacement locks, locking pins, holdback clips and vinyl track inserts for Bertha HV accordion shutters, the accordions we sell.
Below: how an accordion shutter works and what each part does, which replacement part fits which problem, and the simple maintenance that keeps an accordion sliding smoothly.
How an accordion hurricane shutter works
An accordion shutter is a row of aluminum blades that fold together like an accordion. The blades ride in a top track and a bottom track that stay on the wall around the opening. When the shutter is open, the blades stack at the sides of the opening. When a storm is coming, you slide each side closed across the opening and lock it where the two sides meet.
The parts you'll hear about:
- Blades: the folding aluminum panels.
- Top and bottom tracks: the rails the blades ride in.
- Centermate: the piece where the two sides meet in the middle and lock together.
- Lock: a keyed lock or a keyless egress turn lock, set up to lock from the outside or the inside.
- Locking pins: aluminum rods that hold the shutter in place.
- Holdback clips: clips that keep the stacked blades from moving and rattling when the shutter is open.
- Vinyl track insert: a strip that keeps debris out of the track.
Accordion shutter replacement parts
| Part | What it fixes | Price |
|---|---|---|
| Push button keyed lock | A broken or missing outside lock, or lost keys. Includes the lock, two keys, a plastic cover and two screws | $16.99 |
| Egress turn lock | Locking the shutter from inside the house: turn and go | $16.99 |
| HV T-handle lock | A broken or missing T-handle lock. The kit includes the 3-inch metal T-handle, two keys keyed the same, the locking lever, locking plate, lever guard, plate screw and two stem nuts | $21.99 |
| Locking pins (pair) | Missing or bent locking pins. Also fit Bahama shutters | From $9.75 |
| Holdback clips (4-pack) | Blades that move or rattle when the shutter is open | $10.99 |
| Vinyl track insert (4 ft) | Leaves, sand and debris collecting in the track | $14.99 |
Prices as of November 2026. All are made for Bertha HV accordion shutters. If your accordions are another brand, compare your old part with the photos and measurements on the product page, or call us at 561-626-8708 before you order.
Replacing an accordion shutter lock
Which lock do you have? Look at how the shutter locks:
- Uses a key and a push button? That's the push button keyed lock, made for locking from the outside.
- Turns to lock, with no key? That's the egress turn lock, made for locking from the inside: just turn and go.
- Has a T-shaped handle? That's the HV T-handle lock, which has a 3-inch handle on a base just over 2 inches long.
Lost the key? The push button keyed lock and the T-handle lock each come with two keys.
Colors. Every lock comes in White, Ivory, Beige or Bronze, so you can match your shutter.
Need to lock from inside instead of outside? The egress turn lock is made for locking from inside, which suits a bedroom where you may need to open the shutter from inside to get out. When you order a new accordion, you can choose a keyed lock or an egress turn lock, lockable from the inside or the outside.
Locking pins
Our locking pins are aluminum rods, 1/2 inch in diameter, with a tapered point on one end and a screw hole on the other. Each comes with a 1/4-20 stainless steel thumbscrew. They're sold in pairs in lengths from 6 to 96 inches: 6, 12, 18, 24, 30, 36, 48, 60, 72, 84 and 96 inches.
To order the right one, measure the length of the pin you're replacing. The same pins fit accordions and Bahama shutters.
Rattling blades and dirty tracks
Blades that rattle when open. Holdback clips hold the stacked blades in place so they don't move or rattle in the wind. They're durable plastic with a finger clip that's easy to remove when you close the shutter. Sold in packs of four, in white or black.
Debris in the track. A vinyl track insert keeps leaves, sand and debris out of the track. It comes in 4-foot lengths that you can cut to size or butt end to end, in White, Ivory, Bronze, Beige or Black.
Accordion shutter maintenance
Accordion shutters need very little upkeep:
- Wash them now and then. Aluminum needs only occasional washing.
- Lubricate the rollers and the locking mechanism on a regular schedule with a silicone-based product.
- Keep the tracks clear. Debris in a track is what stops a shutter sliding smoothly; a vinyl track insert helps keep it out.
- Test them before hurricane season. Close each shutter all the way and lock it, so you find a sticky track or a missing key before a storm, not during one.
When a part won't fix it
If a shutter needs more than a replacement lock, pin, clip or track insert, a local handyman or contractor can look at it. Post your repair job free on Hurricane Handyman to get fixed-price quotes.
If you're replacing the shutter, price a new one in our accordion shutter price calculator. See accordion hurricane shutters cost for prices by size.
Accordion shutter repair: FAQ
Can accordion hurricane shutters be repaired? Often, yes. Locks, keys, locking pins, holdback clips and track inserts can all be replaced without replacing the shutter.
How do I replace an accordion shutter lock? Order the lock that matches yours: push button keyed, egress turn or T-handle. The push button lock comes with its cover and two screws, and the T-handle kit includes all its hardware. If you'd rather not do it yourself, post the job on Hurricane Handyman.
What if I lost my accordion shutter key? Replace the lock. Our push button keyed lock and HV T-handle lock each come with two keys.
How do you close accordion shutters from inside? With a lock that works from inside. Our egress turn lock is made for locking accordion shutters from the inside, with no key: just turn and go.
What lubricant should I use on accordion shutters? A silicone-based product, on the rollers and the locking mechanism.
What are accordion shutter locking pins? Aluminum rods, 1/2 inch in diameter, that hold the shutter in place. Ours come in pairs from 6 to 96 inches long, with a stainless steel thumbscrew, and also fit Bahama shutters.
Why do my accordion shutters rattle? When the shutter is open, the stacked blades can move in the wind. Holdback clips hold them in place.
Shop all accordion shutter parts, or price new accordion hurricane shutters.
Found this guide helpful? Add Hurricane Shutters Wholesale as a preferred source on Google so you can find us faster!