Quick answer: Every accordion shutter rides in a top track and a bottom track, and its end blades hook onto a side track (the starter). In our accordion calculator those are Steps 9, 10 and 11. The 3/8", 1" and 2" wall-mount choices are build-outs: how far the track holds the shutter off the wall. Pick enough build-out to clear whatever sticks out around the opening. Choose Ceiling Mount when the top track fastens to a ceiling, soffit or beam; a Walkover Track at the bottom of doors you walk through; and Starter Strip Only when the shutter fits between two walls or columns.
The three tracks on every accordion shutter
| Track | Calculator step | What it does | Your choices |
|---|---|---|---|
| Top track | Step 9 | Carries the shutter. The blades hang and slide in it. | 1" wall-mount, ⅜" wall-mount, 2" wall-mount, Ceiling Mount |
| Bottom track | Step 10 | Guides the bottom of the blades and holds them in a storm. | 1" wall-mount, ⅜" wall-mount, 2" wall-mount, Walkover Track, Adjustable Track, Ceiling Mount |
| Side track (starter) | Step 11 | Anchors the first blade at each end of the shutter. | 1" wall-mount, ⅜" wall-mount, 2" wall-mount side track, or Starter Strip Only (trapped/fixed openings) |
The tracks you pick are part of the shutter you order; you do not buy them separately. Wall anchors are not included.
What 3/8", 1" and 2" wall-mount mean
A wall-mount track has a flat leg that is fastened to the face of the wall and an arm that holds the shutter out in front of it. The number is the build-out: how far out from the wall the track holds the shutter. A 2" track holds the shutter about 1⅝" farther out than a ⅜" track.
Why it matters: the closed shutter cannot touch anything. Window and door frames, trim, stucco bands, sills, brick molding, door handles and locks often stick out past the wall where the tracks are fastened. More build-out also adds space between the shutter and the glass; the product approval sets a minimum distance between the closed shutter and the glass for each opening size and wind load.
How to pick your build-out
- Find where the tracks will be fastened: on the wall above the opening, below it and on each side.
- Hold a straightedge across the opening at those spots and measure how far the farthest thing sticks out past the wall: the frame, trim, sill, handle or lock.
- Choose a build-out at least that deep. Nothing sticks out: 3/8". Up to 1": 1". Between 1" and 2": 2".
- Use the same build-out on the top, bottom and side tracks so the shutter hangs straight, unless you use a walkover, adjustable or floor-mounted bottom track.
- If something sticks out more than 2", send us a photo before you order.
| Build-out | Typical opening |
|---|---|
| ⅜" | Flat block or stucco wall; the window or door sits back in the opening and nothing sticks out past the wall. |
| 1" | Trim, a stucco band or a window frame that sits slightly proud of the wall. |
| 2" | A deep sill, brick molding, a protruding door frame, or door handles and locks that stick out. |
Ceiling mount
A ceiling-mount top track is fastened to a flat surface above the opening instead of the wall face: a porch or lanai ceiling, a soffit, or the underside of a beam. The shutter hangs straight down from it. Choose it when there is no wall above the opening to fasten to, or when the shutter should run all the way up to a ceiling, which is common on covered porches and patios.
"Ceiling Mount" in the bottom-track list means the same flat track fastened to the floor, slab or a flat sill under the opening, rather than to the wall below it.
Bottom track choices: wall-mount, walkover or adjustable
| Bottom track | Where it goes | Best for |
|---|---|---|
| Wall-mount (⅜", 1" or 2") | Fastened to the wall below the opening, with the same build-out as your top track. | Windows, where there is wall below the opening. |
| Walkover Track | Fastened to the floor. About 1" tall with sloped sides, so it stays down all year and you walk over it. | Entry doors, sliding glass doors and patio openings people walk through. |
| Adjustable Track | A base piece fastened to the floor or sill, with the track fastened to it, so its height is set during installation. | Openings where the bottom track has to be set at a particular height. |
| Ceiling Mount | The flat track, fastened to the floor, slab or a flat sill. | Floors and flat sills where you do not need a walkover. |
Side tracks and starter strips
The side track, also called the starter, is where the first blade at each end of the shutter hooks on. The ⅜", 1" and 2" wall-mount side tracks are fastened to the wall face beside the opening; pick the one that matches your top and bottom tracks so the end blade lines up with them.
Starter Strip Only is for trapped or fixed openings: the shutter fits between two walls or columns, for example inside a recessed opening or between porch columns, and a starter strip is fastened to the side of each one.
Common combinations
| Your opening | Top track (Step 9) | Bottom track (Step 10) | Side track (Step 11) |
|---|---|---|---|
| Window in a flat block or stucco wall, nothing sticking out | ⅜" wall-mount | ⅜" wall-mount | ⅜" wall-mount |
| Window with trim or a sill sticking out up to 1" | 1" wall-mount | 1" wall-mount | 1" wall-mount |
| Window or door with something sticking out 1" to 2" | 2" wall-mount | 2" wall-mount | 2" wall-mount |
| Sliding glass door or entry door | Wall-mount deep enough to clear the frame and handle | Walkover Track | Same build-out as the top track |
| Covered porch or lanai opening between columns, ceiling above | Ceiling Mount | Walkover or Adjustable Track | Starter Strip Only |
Not sure which fits? Email a photo of the opening, showing the wall around it, to info@hurricaneshutterswholesale.com or call 561-626-8708, and we will tell you which tracks to pick. If you want someone to install the shutter, post the job free on Hurricane Handyman, our sister site.
Ready to price it? Enter your opening in the accordion shutter calculator. Prices for common sizes are in how much accordion hurricane shutters cost, and replacement locks and parts for Bertha HV accordions are on the accordion shutter parts page.
Accordion track FAQ
What tracks does an accordion shutter need? Three: a top track that the shutter hangs and slides in, a bottom track that guides it at the floor or sill, and a side track (also called a starter) at each end that the first blade hooks onto. In our accordion calculator these are Steps 9, 10 and 11, and the tracks you pick there come with the shutter.
What does build-out mean on an accordion shutter track? Build-out is how far the track holds the shutter off the wall. Our wall-mount tracks come in 3/8", 1" and 2" build-outs. A bigger build-out moves the shutter farther from the wall so it clears trim, sills, window frames and door handles that stick out.
Should I choose a 3/8", 1" or 2" accordion track? Measure how far the farthest thing around the opening sticks out from the wall where the tracks will be fastened: trim, a stucco band, the window or door frame, a sill or a handle. Pick a build-out at least that deep. 3/8" suits a flat wall with nothing sticking out, 1" covers most trim, and 2" is for deeper sills, brick molding and door hardware. In most cases the top, bottom and side tracks all use the same build-out.
What is a walkover track for accordion shutters? A walkover track is a low bottom track, about 1 inch tall with sloped sides, that is fastened to the floor and stays there all year. You can walk over it when the shutter is open, which is why it is the usual choice for entry doors, sliding glass doors and patio openings.
What is an adjustable accordion bottom track? An adjustable track is a two-piece bottom track: a base piece fastened to the floor or sill and a track piece fastened to it, so the installer can set the track at the right height for the opening.
When should I use a ceiling mount accordion track? Use a ceiling mount when the top track has to be fastened to something overhead, such as a porch or lanai ceiling, a soffit or the underside of a beam, instead of the wall above the opening. It is common on covered porches and patios and on openings that run right up to a ceiling.
What is a starter strip on an accordion shutter? The starter is the track at each end of the shutter that the first blade hooks onto. Wall-mount side tracks come in 3/8", 1" and 2" to match your top and bottom tracks. "Starter Strip Only" is for trapped or fixed openings, where the shutter fits between two walls or columns and the starter is fastened to the side of each one.
Are anchors included with accordion shutters? No. Wall anchors are not included with our accordion shutters; they are sold separately in our hurricane hardware section. The anchor type and spacing depend on your wall and the product approval.