Are Bahama shutters hurricane rated? The short answer
Some are. Bahama shutters come in impact-rated and decorative versions, and only the impact-rated ones are hurricane protection. A decorative Bahama shutter looks almost the same on the house, so the type matters more than the style.
We sell three Bahama shutters:
- Impact-rated HVHZ: built for Florida's High-Velocity Hurricane Zone, which is Miami-Dade and Broward counties.
- Impact-rated Non-HVHZ: approved for Florida locations outside the HVHZ.
- Decorative (non-impact): shade, privacy and curb appeal only. It cannot be used as hurricane protection.
Every Bahama shutter we sell is aluminum. The impact-rated ones are made from 6063-T6 aluminum alloy, a stronger temper of the same alloy than T5.
The three types side by side
| Impact-rated HVHZ | Impact-rated Non-HVHZ | Decorative | |
|---|---|---|---|
| Hurricane protection | Yes | Yes | No |
| Where it's for | Miami-Dade and Broward (Florida HVHZ) | Florida outside the HVHZ | Shade and looks anywhere |
| Blade | "Z" blade | 2-inch blade | 1-1/4-inch, 2-inch or "Z" blade |
| Back of the shutter | Solid backing, vented or not | Screen | — |
| How it locks down for a storm | Tie-down angle | Slide rod locking pin | No storm lock |
| Hinges | Standard, 1-inch build-out, flat | Standard, 1/4-inch build-out, flat | Standard, 1/4- or 1-inch build-out, flat |
| Price, 24 x 36 window (wood frame wall) | $534.80 | $508.53 | $435.00 |
Prices as of November 2026, in mill finish. For prices at other sizes, see how much do Bahama shutters cost.
What makes an impact-rated Bahama shutter strong
The aluminum. The impact-rated Bahama shutters we sell are 6063-T6 aluminum. T6 is the stronger heat treatment of 6063, so the same profile can carry more load before it bends permanently than one made in T5.
HVHZ shutters: "Z" blades plus a solid backing. The HVHZ shutter has "Z"-shaped blades and a solid backing on the back of the shutter. The backing adds strength against the higher wind, rain and air pressure in the High-Velocity Hurricane Zone. You choose a backing with perforated vent holes, which lets some light through, or one with no vent holes. The HVHZ shutter is rated to a maximum leeward (suction) pressure of -100 PSF.
Non-HVHZ shutters: 2-inch blades plus a screen. The Non-HVHZ shutter doesn't need a backing. It has a screen on the back that acts as an extra wind barrier, deflecting wind and rain away from the window.
Built to the approval's limits. Impact-rated shutters have maximum widths and heights. If you enter a window larger than the maximum, our calculator tells you to switch to decorative. Some reinforcement is required, not optional:
- Every Bahama shutter 42 inches wide or more gets a center mullion; wider shutters get more than one.
- HVHZ shutters have a tie-down angle and support arm at the bottom of each mullion.
- HVHZ shutters taller than 52 inches need a side bracket at mid-span on each side. Under the product approval, a single unit is only allowed without side brackets up to a 52-inch span.
Required brackets ship attached to your shutter.
Powder coating. Powder coating is optional (mill finish costs nothing extra), but it's a durable, heat-bonded finish that resists fading, chipping and scratching and protects the aluminum. The hinge, arms and channel bracket are coated to match.
How a Bahama shutter closes for a storm
A Bahama shutter hangs from a hinge above the window. Day to day, adjustable extendable arms hold it propped open as an awning, partly open or closed.
When a storm is coming, you lower the shutter over the window and secure the bottom to the house:
- Non-HVHZ: a slide rod locking pin near the bottom of the shutter slides into a channel bracket on the wall. You choose where the slide rod is reached from: the rear or bottom (the most common, because you can't see them from the street) or the face of the shutter.
- HVHZ: a tie-down angle secures the bottom, at the bottom or sides of the shutter.
- Decorative: no locking mechanism, because it isn't storm protection.
Upstairs windows. On second- and third-floor windows, choose rear slide rod access. Then you can lock the shutter down by opening the window from inside, with no ladder. A build-out hinge may be needed to give you room to reach the slide rod.
Do you need HVHZ-approved Bahama shutters?
If the shutters are your hurricane protection and your home is in Miami-Dade or Broward County, yes. Under the Florida Building Code, those two counties are the High-Velocity Hurricane Zone.
Outside the HVHZ, check with your building department for what your address requires. Many homeowners outside it, including in Palm Beach County, still choose HVHZ-approved shutters for the extra strength, and some HOAs ask for them.
Approval is per product and per size, so confirm that the shutter you order carries the approval your building department requires.
Decorative Bahama shutters
Decorative Bahama shutters give you most of what people like about the style without the storm rating:
- Shade. They keep direct sun off the glass, which can lower cooling bills.
- Privacy. The angled blades let you see out while making it hard to see in.
- Curb appeal. They give the house a tropical, architectural look.
They are not hurricane protection and have no storm lock. If your windows need protecting, choose an impact-rated shutter or another type, such as accordion, roll-down or storm panels.
Wood, vinyl or aluminum Bahama shutters?
Every Bahama shutter we sell is aluminum, powder coated or in mill finish. Our hurricane-rated Bahama shutters are designed to stand up to sun, wind, rain and salt air without fading, cracking, mildewing or rusting, and they carry Florida Building Code approval as storm protection.
Many wood and vinyl Bahama-style shutters are sold as decorative only. Whatever the material, if you're counting on a shutter in a hurricane, check that the exact model carries a product approval for your area.
Are Bahama and Bermuda shutters the same?
Yes. "Bahama" and "Bermuda" are two names for the same top-hinged shutter that props out for shade and lowers for storm protection. Colonial shutters are different: they hinge at the sides and close like a pair of doors. Compare them in our guide to the types of hurricane shutters.
Hurricane-rated Bahama shutters: FAQ
Are Bahama shutters hurricane rated? Impact-rated Bahama shutters are. We sell an impact-rated HVHZ shutter for Miami-Dade and Broward and an impact-rated Non-HVHZ shutter for the rest of Florida. Decorative Bahama shutters are not hurricane rated.
Are Bahama shutters impact rated? The impact-rated versions are. A decorative Bahama shutter can look similar, so check which type you're buying.
Are Bahama shutters approved for Miami-Dade? Our impact-rated HVHZ Bahama shutter is built for the High-Velocity Hurricane Zone, which under the Florida Building Code is Miami-Dade and Broward counties.
What wind can Bahama shutters withstand? Shutters are rated by design pressure, not wind speed. Our HVHZ Bahama shutter is rated to a maximum leeward pressure of -100 PSF. Your building department sets the pressure your window needs.
Can I close Bahama shutters from inside? On a Non-HVHZ shutter with rear slide rod access, yes: you open the window and lock the shutter down from inside. That's the choice we suggest for second- and third-floor windows.
Can Bahama shutters protect sliding glass doors? No. Bahama shutters cover windows only. For sliding glass doors and other large openings, see our accordion and roll-down shutters.
How much do hurricane-rated Bahama shutters cost? For a 24 x 36 inch window on a wood frame wall, $508.53 for impact-rated Non-HVHZ and $534.80 for HVHZ, as of November 2026. See Bahama shutter prices by size.
Ready to price yours? Choose impact-rated HVHZ, impact-rated Non-HVHZ or decorative in our Bahama shutter price calculator.
Found this guide helpful? Add Hurricane Shutters Wholesale as a preferred source on Google so you can find us faster!