Tapcon SG Screw Anchors Male Panelmate Screw Anchors | Hurricane Shutters Wholesale

Male Panelmate Pro Screw Anchors

5.00 LBS
Calculated at Checkout
Panelmate Pro Anchor for Hurricane Protection
  • panelmate-anchor-selection-chart.png

  • Direct mount permanent anchors for quick and easy installation of metal and plywood panels to wood, hollow block, brick and concrete.

  • Just drill and drive, no need to countersink

  • Threaded chamfered safety collar prevents overdriving.

  • Available in Silver Color Only - Coated with Silver Stalgard® Finish

  • 1/4-20 x 7/8" external thread above collar

  • Pre-drill with standard 7/32" or 1/4" ANSI masonry drill bits

  • Use 3/16" Hex Driver to install (Found Here)

  • No caulking required

  • Made in the USA

  • Comes in five lengths - 2-1/4", 3-1/4", 4-1/2", 5-1/2", and 7-3/8"

  • The 7-3/8" TVAS (Through Veneer Anchoring System) is the first anchoring system designed specifically to attach hurricane shutters and headers/footers through brick to a building’s structural members.

  • Comes in bags of 25, 50 or 100 pieces


How to use:

Step One: Drill hole with standard 7/32" or 1/4" ANSI masonry drill bit

Step Two: Use a 3/16" Hex Driver (Found Here) to drive the Panelmate Pro Anchors