Simu 446SK 50Nm Remote Roll-Down Shutter Motor with Manual Override
The Simu 446SK is a 50Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 12 rpm and has a theoretical lifting capacity of 224-246 lbs (lifting capacity decreases as the shutter height increases). This Type 5 kit includes 60mm & 70mm crowns and 60mm & 70mm drives, so it fits a 60mm or 70mm octagonal roller tube.
Specifications
- Brand: Simu
- Model: 446SK
- Motor type: Remote with manual override
- Type 5
- 3 wire
- Rated torque: 50 Nm
- Output speed: 12 rpm
- Motor length: 30.25"
- Rated voltage: 120V
- Frequency: 60Hz
- Rated power: 250W
- Rated current: 2.1A
- Continuous run time: 5 min
- Protection degree: IP44
- Max limit turns: 28
- Theoretical lifting capacity: 224-246 lbs (decreases as shutter height increases)
What's Included in the Kit
- 60mm & 70mm crowns
- 60mm & 70mm drives
- Bracket
- Five-channel remote (emitter)

How It Is Controlled
The 446SK combines both: a 3-wire remote motor with a built-in radio receiver and a five-channel remote included, plus a manual override so you can raise or lower the shutter with a roll shutter crank handle (sold separately) when the power is out.
Smart Home and App Control
Add the TaHoma Smart Home Gateway 1811731 to control this motor from your phone or with Alexa, Google Assistant and SmartThings. TaHoma works with Simu motors only. Extra or replacement remotes: Simu HZ 5-Channel Remote #2006143.
Equivalent EMS Brand model: 446K. Simu and EMS Brand motors use different accessories, so parts from one brand are not compatible with the other brand's motors.
Choosing the Right Roll-Down Shutter Motor
Pick the motor by shutter weight and tube size. 50Nm motors lift about 224-246 lbs; for a heavier shutter see the 527SK 100Nm model. Other Simu 50Nm options: 449SK (standard), 423SK (manual override), 445SK (remote). See all roll-down shutter motors.
Simu Motor Specification Chart

Frequently Asked Questions
Will the 446SK fit my roll-down shutter?
The 446SK is a Type 5 motor with a 30.25" motor length and comes with adapters for a 60mm or 70mm octagonal roller tube. Check your tube size and shutter weight against the 50Nm lifting capacity of 224-246 lbs.
Can I replace a EMS Brand motor with the 446SK?
The 446SK is equivalent to the EMS Brand 446K, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.
What happens if the power goes out?
The 446SK has a manual override, so you can operate the shutter with a crank handle (sold separately).