Hurricane Handyman Homeowners: fixed-price quotes to install, put up or take down shutters: fixed-price shutter quotes Post a job freeNeed storm help? Handymen & contractors: find local storm jobs: find local jobs Join freeFind jobs

Clear Lexan Hurricane Panels: What They Are and Where You Can Use Them

Quick answer: A Lexan storm panel is a clear, corrugated polycarbonate hurricane panel. It hangs in the same headers and tracks as a metal storm panel, but lets daylight into the house during a storm. You can use clear panels on any window, door or slider, on their own or mixed with metal panels. Three limits matter: only the 2" clear panel is approved in Miami-Dade and Broward, and there it must stand 6½ to 10½ inches off the glass; panel length is limited by wind load; and clear panels go up for the hurricane warning period only, because long sun exposure degrades them. Ours cost $12.99 per foot.

Looking through a clear polycarbonate Bertha hurricane storm panel standing outdoors
Looking through a clear Bertha storm panel. The keyhole slots at the bottom hang on the track the same way a metal panel does.

What is a Lexan storm panel?

Lexan is a brand name for polycarbonate, a tough clear plastic. People say Lexan panels, polycarbonate panels or clear storm panels for the same product: a clear panel formed into the same corrugated shape as a metal storm panel, cut to length, and hung from a header and a bottom track.

It is not plexiglass. Plexiglass is acrylic, a different and more brittle plastic, and no plain plastic sheet counts as hurricane protection. An approved clear storm panel is a specific product that passed impact and wind-pressure testing. The approval drawing for our 2¼" clear panel calls it ".093 clear Lexan"; our 2" clear panel is 0.100-inch polycarbonate.

Our two clear panels compared

2" clear panel 2¼" clear panel
Approved for HVHZ (Miami-Dade, Broward) and the rest of Florida Outside the HVHZ only
Thickness 0.100" 0.093"
Lengths we cut 12" to 142" 12" to 150"
Price per foot* $12.99 $12.99
Highest wind load in its approval ±60 psf (on a 40" panel) +105/−110 psf (on a 4-foot panel)
Required gap from the glass HVHZ: 6½" to 10½"
Elsewhere: none in wind zones 1–3, except essential facilities
1" minimum
Header it hangs in 2" H- or U-header 2¼" H- or U-header

*List price as of November 2026. Panels 120" and longer carry an overlength fee. The 2" or 2¼" is the height of the panel’s ribs, and a clear panel must match the metal panels it hangs next to. See 2″ vs 2.25″ storm panels for how to tell which size you have.

Where can you use clear hurricane panels?

  • Any opening a storm panel can cover: windows, doors and sliding glass doors. Use them on their own, or mix one or two into a run of metal panels where you want light.
  • Where you will be during the storm: a clear panel or two in the room you shelter in keeps it from being completely dark when the power goes out.
  • Storefronts: customers can see you are open while the windows are covered.
  • Miami-Dade and Broward: only the 2" clear panel, and it has to stand 6½ to 10½ inches off the glass (installations under 30 feet above the ground). A window set close to the face of the wall may need a build-out header and track to get that gap, or metal panels instead.
  • The rest of Florida: the 2" clear panel needs no minimum gap from the glass in wind zones 1 to 3, except on essential facilities such as hospitals and shelters. The 2¼" clear panel needs at least 1 inch.
  • Not as a permanent cover. Clear panels go up for the hurricane warning period and come down after the storm. Long sun exposure degrades polycarbonate.

Remember that a window covered by any storm panel cannot be used as an emergency exit while the panels are up. Plan which openings stay uncovered.

How long can a clear panel be?

The longest approved panel depends on the wind load (design pressure) your opening has to resist. Your installer or building department works out that load from your location, exposure, building height and where the window sits on the wall. These are the limits in each panel’s approval:

Wind load 2" clear, any zone, any mounting 2" clear, outside HVHZ, no H- or U-header
21 psf 11'-0" —
26 psf 10'-0" —
31 psf 9'-0½" —
35 to 36 psf 8'-0½" (36 psf) 12'-0" (35 psf)
40 to 41 psf 7'-0½" (41 psf) 11'-1" (40 psf)
50 to 51 psf 5'-1" (51 psf) 9'-3" (50 psf)
60 psf 3'-4" 7'-5"
Wind load 2¼" clear (outside HVHZ)
+28 / −28 psf 10'-0"
+35 / −40 psf 8'-4"
+45 / −50 psf 7'-6"
+55 / −60 psf 6'-10"
+65 / −70 psf 6'-3"
+75 / −80 psf 5'-6"
+85 / −90 psf 4'-11"
+105 / −110 psf 4'-0"

Read from each panel’s Florida product approval. Wind loads are allowable (ASD) design pressures. We cut the 2" clear panel up to 142" long. Your installer applies the full approval, including anchors and spacing.

Mixing clear and metal panels on one opening

A run of metal storm panels with one clear polycarbonate panel in the middle, overlapping on top of the metal panels on both sides
The clear panel goes in last and overlaps on top of the metal panels on both sides.
  • Same size: a 2" clear panel goes with 2" metal panels, a 2¼" clear panel with 2¼" metal panels. They share the header.
  • Clear on top: install the metal panels on each side first, then set the clear panel so it rests on top of the metal panels at both overlaps.
  • Reinforce every clear panel: sidewalk bolts with clear panel washers and wingnuts through the overlaps. Each clear panel needs 7 clear panel washers. Without them the system is not hurricane protection.
  • The stricter limit wins: when clear and aluminum panels share an opening, the installation has to meet the tighter length, wind load and glass-gap limits of the two approvals.

Our storm panel installation guide walks through the full sequence.

What do clear hurricane panels cost?

Both of our clear panels are $12.99 per foot of panel length (list price as of November 2026). Metal panels run $6.99 to $9.49 per foot, so clear costs roughly 1.4 to 1.9 times as much per panel.

Panel length Clear panel price
4 ft (48") $51.96
5 ft (60") $64.95
6 ft (72") $77.94
8 ft (96") $103.92
10 ft (120") $129.90 plus overlength fee

Headers, tracks, anchors, sidewalk bolts and clear panel washers are extra. Our storm panel instant pricing tool prices each opening with the panels, headers and tracks it needs.

Clear vs metal storm panels

Clear (polycarbonate) Metal (aluminum or steel)
Daylight Yes No
Price per foot* $12.99 $6.99 to $9.49
Approved in Miami-Dade and Broward 2" clear only, with a 6½" to 10½" gap from the glass Several panels, in both sizes
How long it can stay up Hurricane warning period only Through the storm and after
Care Scratches easily; soapy water only Low maintenance

Most homes use metal panels on most openings and clear panels where light matters. See the full storm panel lineup.

Care and storage

  • Polycarbonate is very strong but scratches easily. Keep panels off concrete, stucco and sharp metal corners when you move them.
  • Clean with soapy water (dish detergent) and a clean sponge or rag only. Never use ammonia, bleach, solvents, abrasive cleaners, steel wool or a sponge with sand in it.
  • Rinse off sand before stacking the panels. Store them flat, raised off the floor on 2x4s, clean, dry and out of the sun, never wrapped in plastic.

Frequently asked questions

Where can I use Lexan hurricane panels? Anywhere you would use a metal storm panel: windows, doors and sliding glass doors, either on their own or mixed with metal panels on the same opening. In Miami-Dade and Broward (the High Velocity Hurricane Zone), only our 2" clear panel is approved, and it has to stand 6½ to 10½ inches off the glass for installations less than 30 feet above the ground. Outside that zone, the 2" clear panel needs no gap from the glass in wind zones 1 to 3 (except essential facilities), and the 2.25" clear panel needs 1 inch. Clear panels are meant to go up for the hurricane warning period only.

What is a Lexan storm panel? A Lexan storm panel is a clear, corrugated polycarbonate hurricane panel. Lexan is a brand name for polycarbonate, so "Lexan," "polycarbonate" and "clear" storm panels are the same kind of product. It hangs in the same headers and tracks as a metal storm panel, but lets daylight in.

Are polycarbonate hurricane panels approved in Miami-Dade? Our 2" clear panel is approved under the Florida Building Code for the High Velocity Hurricane Zone, which covers Miami-Dade and Broward, with a required gap of 6½ to 10½ inches from the glass depending on panel length. Our 2.25" clear panel is approved outside the HVHZ only. Your building department has the final say.

Are polycarbonate hurricane panels Florida approved? Both of ours have a Florida product approval. The 2" clear panel is approved for the High Velocity Hurricane Zone and the rest of the state; the 2.25" clear panel is approved outside the HVHZ.

How much do polycarbonate hurricane panels cost? Our clear panels cost $12.99 per foot of panel length as of November 2026, for both the 2" and 2.25" sizes, so a 6-foot panel is $77.94 and an 8-foot panel is $103.92. Panels 120" and longer carry an overlength fee. Metal panels run $6.99 to $9.49 per foot.

Can I leave clear hurricane panels up all season? No. Clear panels are meant to go up for the hurricane warning period and come down after the storm. Long sun exposure degrades polycarbonate.

Can I mix clear panels with metal panels? Yes, if they are the same size: 2" clear with 2" metal, or 2.25" clear with 2.25" metal. The clear panel overlaps on top of the metal panels on both sides, every clear panel is reinforced with sidewalk bolts and clear panel washers, and the opening has to meet the stricter of the two panels’ approval limits.

Is plexiglass hurricane proof? No sheet of plexiglass is a hurricane panel. Plexiglass is acrylic, a different and more brittle plastic than polycarbonate. Hurricane protection has to be a product that was impact-tested and approved, like our clear polycarbonate storm panels.

How thick are clear hurricane panels? Our 2" clear panel is 0.100 inch thick polycarbonate and our 2.25" clear panel is 0.093 inch thick, according to their approval drawings. The 2" and 2.25" are the height of the ribs, not the thickness.

How do I clean clear hurricane panels? Use only soapy water (dish detergent) and a clean sponge or rag. Never use ammonia, bleach, solvents, abrasive cleaners or steel wool, and rinse off sand before stacking the panels, because polycarbonate scratches easily.

Need your panels put up or installed? Post the job free on Hurricane Handyman for fixed-price quotes from local handymen and contractors.

Ready to order? Shop the 2″ clear storm panel or the 2.25″ clear storm panel, or price each opening with the instant pricing tool.