EMS 449K 50Nm Roll-Down Shutter Motor
The EMS Brand 449K is a 50Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 13 rpm and has a theoretical lifting capacity of 150-246 lbs (lifting capacity decreases as the shutter height increases). This Type 5 kit includes 60mm & 70mm crowns and 60mm & 70mm drives, so it fits a 60mm or 70mm octagonal roller tube.
Specifications
- Brand: EMS Brand
- Model: 449K (DM45S)
- Motor type: Standard
- Type 5
- 4 wire
- Rated torque: 50 Nm
- Output speed: 13 rpm
- Motor length: 21.5"
- Rated voltage: 120V
- Frequency: 60Hz
- Rated power: 235W
- Rated current: 2.2A
- Continuous run time: 4 min
- Protection degree: IP44
- Max limit turns: 22
- Theoretical lifting capacity: 150-246 lbs (decreases as shutter height increases)
What's Included in the Kit
- 60mm & 70mm crowns
- 60mm & 70mm drives
- Bracket
- Alternate bracket

How It Is Controlled
The 449K is a 4-wire standard motor: it is wired to an up/down wall switch and has no built-in remote receiver and no manual override. If you want to be able to crank the shutter open during a power outage, choose the 423K override model instead.
Equivalent Simu model: 449SK. EMS Brand and Simu motors use different accessories, so parts from one brand are not compatible with the other brand's motors.
Choosing the Right Roll-Down Shutter Motor
Pick the motor by shutter weight and tube size. 50Nm motors lift about 150-246 lbs; for a heavier shutter see the 510K 100Nm model. Other EMS Brand 50Nm options: 423K (manual override), 445K (remote), 446K (remote with manual override). See all roll-down shutter motors.
EMS Brand Motor Specification Chart

Frequently Asked Questions
Will the 449K fit my roll-down shutter?
The 449K is a Type 5 motor with a 21.5" motor length and comes with adapters for a 60mm or 70mm octagonal roller tube. Check your tube size and shutter weight against the 50Nm lifting capacity of 150-246 lbs.
Can I replace a Simu motor with the 449K?
The 449K is equivalent to the Simu 449SK, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.
What happens if the power goes out?
The 449K has no manual override, so the shutter cannot be cranked by hand. Choose an override model if you need power-outage backup.