Hurricane Handyman Homeowners: fixed-price quotes to install, put up or take down shutters: fixed-price shutter quotes Post a job freeNeed storm help? Handymen & contractors: find local storm jobs: find local jobs Join freeFind jobs

EMS Brand Roll-Down Shutter Motor Kit 50Nm with Manual Override - Model 423K

$224.00
SKU:
423K
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
EMS Brand 423K 50Nm roll-down shutter motor

EMS 423K 50Nm Roll-Down Shutter Motor with Manual Override

The EMS Brand 423K is a 50Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 13 rpm and has a theoretical lifting capacity of 150-246 lbs (lifting capacity decreases as the shutter height increases). This Type 5 kit includes 60mm & 70mm crowns and 60mm & 70mm drives, so it fits a 60mm or 70mm octagonal roller tube.

Specifications

  • Brand: EMS Brand
  • Model: 423K (DM45S)
  • Motor type: Manual override
  • Type 5
  • 4 wire
  • Rated torque: 50 Nm
  • Output speed: 13 rpm
  • Motor length: 24"
  • Rated voltage: 120V
  • Frequency: 60Hz
  • Rated power: 235W
  • Rated current: 2.2A
  • Continuous run time: 4 min
  • Protection degree: IP44
  • Max limit turns: 22
  • Theoretical lifting capacity: 150-246 lbs (decreases as shutter height increases)

What's Included in the Kit

  • 60mm & 70mm crowns
  • 60mm & 70mm drives
  • Bracket

EMS Brand 423K roll-down shutter motor kit and included parts

How It Is Controlled

The 423K is a 4-wire standard motor with a manual override. It is wired to an up/down wall switch, and if the power goes out you can still raise or lower the shutter by hand with a roll shutter crank handle (sold separately).

Equivalent Simu model: 423SK. EMS Brand and Simu motors use different accessories, so parts from one brand are not compatible with the other brand's motors.

Choosing the Right Roll-Down Shutter Motor

Pick the motor by shutter weight and tube size. 50Nm motors lift about 150-246 lbs; for a heavier shutter see the 529K 100Nm model. Other EMS Brand 50Nm options: 449K (standard), 445K (remote), 446K (remote with manual override). See all roll-down shutter motors.

EMS Brand Motor Specification Chart

EMS Brand roll-down shutter motor specification chart

Frequently Asked Questions

Will the 423K fit my roll-down shutter?
The 423K is a Type 5 motor with a 24" motor length and comes with adapters for a 60mm or 70mm octagonal roller tube. Check your tube size and shutter weight against the 50Nm lifting capacity of 150-246 lbs.

Can I replace a Simu motor with the 423K?
The 423K is equivalent to the Simu 423SK, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.

What happens if the power goes out?
The 423K has a manual override, so you can operate the shutter with a crank handle (sold separately).