Hurricane Handyman Homeowners: fixed-price quotes to install, put up or take down shutters: fixed-price shutter quotes Post a job freeNeed storm help? Handymen & contractors: find local storm jobs: find local jobs Join freeFind jobs

Simu Roll-Down Shutter Motor Kit 100Nm Standard - Model 510SK

$329.00
SKU:
510SK
Weight:
12.00 LBS
Shipping:
Calculated at Checkout
Simu 510SK 100Nm roll-down shutter motor kit with included parts

Simu 510SK 100Nm Roll-Down Shutter Motor

The Simu 510SK is a 100Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 14 rpm and has a theoretical lifting capacity of 308-448 lbs (lifting capacity decreases as the shutter height increases). This Type 6 kit includes 70mm crown and 70mm drive, so it fits a 70mm octagonal roller tube.

Specifications

  • Brand: Simu
  • Model: 510SK
  • Motor type: Standard
  • Type 6
  • 4 wire
  • Rated torque: 100 Nm
  • Output speed: 14 rpm
  • Motor length: 27.125"
  • Rated voltage: 120V
  • Frequency: 60Hz
  • Rated power: 430W
  • Rated current: 3.8A
  • Continuous run time: 4 min
  • Protection degree: IP44
  • Max limit turns: 22
  • Theoretical lifting capacity: 308-448 lbs (decreases as shutter height increases)

What's Included in the Kit

  • 70mm crown
  • 70mm drive
  • Bracket
  • Alternate bracket

Simu 510SK roll-down shutter motor kit and included parts

How It Is Controlled

The 510SK is a 4-wire standard motor: it is wired to an up/down wall switch and has no built-in remote receiver and no manual override. If you want to be able to crank the shutter open during a power outage, choose the 529SK override model instead.

Equivalent EMS Brand model: 510K. Simu and EMS Brand motors use different accessories, so parts from one brand are not compatible with the other brand's motors.

Choosing the Right Roll-Down Shutter Motor

Pick the motor by shutter weight and tube size. 100Nm motors lift about 308-448 lbs; for a lighter shutter see the 449SK 50Nm model. Other Simu 100Nm options: 529SK (manual override), 528SK (remote), 527SK (remote with manual override). See all roll-down shutter motors.

Simu Motor Specification Chart

Simu roll-down shutter motor specification chart

Frequently Asked Questions

Will the 510SK fit my roll-down shutter?
The 510SK is a Type 6 motor with a 27.125" motor length and comes with adapters for a 70mm octagonal roller tube. Check your tube size and shutter weight against the 100Nm lifting capacity of 308-448 lbs.

Can I replace a EMS Brand motor with the 510SK?
The 510SK is equivalent to the EMS Brand 510K, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.

What happens if the power goes out?
The 510SK has no manual override, so the shutter cannot be cranked by hand. Choose an override model if you need power-outage backup.