Simu 528SK 100Nm Remote Roll-Down Shutter Motor
The Simu 528SK is a 100Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 14 rpm and has a theoretical lifting capacity of 308-448 lbs (lifting capacity decreases as the shutter height increases). This Type 6 kit includes 70mm crown and 70mm drive, so it fits a 70mm octagonal roller tube.
Specifications
- Brand: Simu
- Model: 528SK
- Motor type: Remote
- Type 6
- 3 wire
- Rated torque: 100 Nm
- Output speed: 14 rpm
- Motor length: 28.75"
- Rated voltage: 120V
- Frequency: 60Hz
- Rated power: 430W
- Rated current: 3.8A
- Continuous run time: 4 min
- Protection degree: IP44
- Max limit turns: 28
- Theoretical lifting capacity: 308-448 lbs (decreases as shutter height increases)
What's Included in the Kit
- 70mm crown
- 70mm drive
- Bracket
- Alternate bracket
- Five-channel remote (emitter)

How It Is Controlled
The 528SK is a 3-wire remote motor with a built-in radio receiver, and the kit includes a five-channel remote, so one remote can run up to five shutters. It has no manual override; if you want crank backup during power outages, choose the 527SK remote override model.
Smart Home and App Control
Add the TaHoma Smart Home Gateway 1811731 to control this motor from your phone or with Alexa, Google Assistant and SmartThings. TaHoma works with Simu motors only. Extra or replacement remotes: Simu HZ 5-Channel Remote #2006143.
Equivalent EMS Brand model: 528K. Simu and EMS Brand motors use different accessories, so parts from one brand are not compatible with the other brand's motors.
Choosing the Right Roll-Down Shutter Motor
Pick the motor by shutter weight and tube size. 100Nm motors lift about 308-448 lbs; for a lighter shutter see the 445SK 50Nm model. Other Simu 100Nm options: 510SK (standard), 529SK (manual override), 527SK (remote with manual override). See all roll-down shutter motors.
Simu Motor Specification Chart

Frequently Asked Questions
Will the 528SK fit my roll-down shutter?
The 528SK is a Type 6 motor with a 28.75" motor length and comes with adapters for a 70mm octagonal roller tube. Check your tube size and shutter weight against the 100Nm lifting capacity of 308-448 lbs.
Can I replace a EMS Brand motor with the 528SK?
The 528SK is equivalent to the EMS Brand 528K, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.
What happens if the power goes out?
The 528SK has no manual override, so the shutter cannot be cranked by hand. Choose an override model if you need power-outage backup.