EMS 527K 100Nm Remote Roll-Down Shutter Motor with Manual Override
The EMS Brand 527K is a 100Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 11 rpm and has a theoretical lifting capacity of 256-386 lbs (lifting capacity decreases as the shutter height increases). This Type 6 kit includes 70mm crown and 70mm drive, so it fits a 70mm octagonal roller tube.
Specifications
- Brand: EMS Brand
- Model: 527K (DM59R)
- Motor type: Remote with manual override
- Type 6
- 3 wire
- Rated torque: 100 Nm
- Output speed: 11 rpm
- Motor length: 30.5"
- Rated voltage: 120V
- Frequency: 60Hz
- Rated power: 340W
- Rated current: 2.94A
- Continuous run time: 4 min
- Protection degree: IP44
- Max limit turns: 22
- Theoretical lifting capacity: 256-386 lbs (decreases as shutter height increases)
What's Included in the Kit
- 70mm crown
- 70mm drive
- Bracket
- Alternate bracket
- Five-channel remote (emitter)

How It Is Controlled
The 527K combines both: a 3-wire remote motor with a built-in radio receiver and a five-channel remote included, plus a manual override so you can raise or lower the shutter with a roll shutter crank handle (sold separately) when the power is out.
Smart Home and App Control
Add the Dooya DD7002B Home Automation Smart Hub to control this motor from your phone or by voice with Google Home or Alexa. The Dooya hub works with EMS Brand motors only.
Equivalent Simu model: 527SK. EMS Brand and Simu motors use different accessories, so parts from one brand are not compatible with the other brand's motors.
Choosing the Right Roll-Down Shutter Motor
Pick the motor by shutter weight and tube size. 100Nm motors lift about 256-386 lbs; for a lighter shutter see the 446K 50Nm model. Other EMS Brand 100Nm options: 510K (standard), 529K (manual override), 528K (remote). See all roll-down shutter motors.
EMS Brand Motor Specification Chart

Frequently Asked Questions
Will the 527K fit my roll-down shutter?
The 527K is a Type 6 motor with a 30.5" motor length and comes with adapters for a 70mm octagonal roller tube. Check your tube size and shutter weight against the 100Nm lifting capacity of 256-386 lbs.
Can I replace a Simu motor with the 527K?
The 527K is equivalent to the Simu 527SK, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.
What happens if the power goes out?
The 527K has a manual override, so you can operate the shutter with a crank handle (sold separately).