Hurricane Handyman Homeowners: fixed-price quotes to install, put up or take down shutters: fixed-price shutter quotes Post a job freeNeed storm help? Handymen & contractors: find local storm jobs: find local jobs Join freeFind jobs

EMS Brand Roll-Down Shutter Motor Kit 100Nm with Manual Override - Model 529K

$245.00
SKU:
529K
Weight:
12.00 LBS
Shipping:
Calculated at Checkout
EMS Brand 529K 100Nm roll-down shutter motor

EMS 529K 100Nm Roll-Down Shutter Motor with Manual Override

The EMS Brand 529K is a 100Nm electric tubular motor for roll-down (rolling) hurricane shutters. Use it as a replacement shutter motor or to motorize a new roll-down shutter. It runs on standard 120V household power at 11 rpm and has a theoretical lifting capacity of 256-386 lbs (lifting capacity decreases as the shutter height increases). This Type 6 kit includes 70mm crown and 70mm drive, so it fits a 70mm octagonal roller tube.

Specifications

  • Brand: EMS Brand
  • Model: 529K (DM59M)
  • Motor type: Manual override
  • Type 6
  • 4 wire
  • Rated torque: 100 Nm
  • Output speed: 11 rpm
  • Motor length: 24.5"
  • Rated voltage: 120V
  • Frequency: 60Hz
  • Rated power: 340W
  • Rated current: 2.94A
  • Continuous run time: 4 min
  • Protection degree: IP44
  • Max limit turns: 22
  • Theoretical lifting capacity: 256-386 lbs (decreases as shutter height increases)

What's Included in the Kit

  • 70mm crown
  • 70mm drive
  • Bracket
  • Alternate bracket

EMS Brand 529K roll-down shutter motor kit and included parts

How It Is Controlled

The 529K is a 4-wire standard motor with a manual override. It is wired to an up/down wall switch, and if the power goes out you can still raise or lower the shutter by hand with a roll shutter crank handle (sold separately).

Equivalent Simu model: 529SK. EMS Brand and Simu motors use different accessories, so parts from one brand are not compatible with the other brand's motors.

Choosing the Right Roll-Down Shutter Motor

Pick the motor by shutter weight and tube size. 100Nm motors lift about 256-386 lbs; for a lighter shutter see the 423K 50Nm model. Other EMS Brand 100Nm options: 510K (standard), 528K (remote), 527K (remote with manual override). See all roll-down shutter motors.

EMS Brand Motor Specification Chart

EMS Brand roll-down shutter motor specification chart

Frequently Asked Questions

Will the 529K fit my roll-down shutter?
The 529K is a Type 6 motor with a 24.5" motor length and comes with adapters for a 70mm octagonal roller tube. Check your tube size and shutter weight against the 100Nm lifting capacity of 256-386 lbs.

Can I replace a Simu motor with the 529K?
The 529K is equivalent to the Simu 529SK, but the two brands use different crowns, drives and brackets and are not interchangeable. Use the accessories included with the motor you buy.

What happens if the power goes out?
The 529K has a manual override, so you can operate the shutter with a crank handle (sold separately).